OX1000 Pack + Mini Compressor + OXAIR

Some details are worth lingering over. With a 1-liter tank and up to 15 minutes of stated air time, the OX1000 gives you more room to observe on your well-prepared dives.

The tank is worn on your back, with its harness and external regulator. In front of you, your eyes are free for what you came to see: the seabed, marine life or the details of your boat.

Up to, per tank

15 min

Tank volume

1 L

Worn with a harness

On the back

Stated air time; it varies with breathing, depth and exertion. The pressure gauge remains your reference during a well-prepared dive.

The OX1000 is designed to be worn on the back: the harness holds the tank, the hose connects it to the regulator and the mouthpiece goes in your mouth. Adjusting the airflow is one of the functions to master before use.

Allow about 20 minutes to refill this 1-liter tank with the mini compressor, or 12 minutes with the Power. The mini accepts AC or 12 V battery power; the Power runs on AC only. US AC input voltage, frequency and plug are awaiting confirmation. Then follow the checks in the user manual.

Harness and regulator

Included

Approx. with the mini compressor

20 min

Approx. with the Power

12 min

Stated working pressure

200 bar

1. Assemble

   Get to know the harness, regulator and connections with the OX1000 tutorial.

2. Set up the refill

   Use the compatible compressor and its filtration setup.

3. Check

   Check your gear and the pressure before every outing.

The OXSEA manual pump is not compatible with the OX1000. Refill time varies with conditions.

A hull to inspect, a detail to check, the urge to know what’s going on under your boat. The OX1000 is also made for boaters who prepare these short dives with the right equipment.

Its back-mounted carry and 1-liter tank are well suited to this use. On board or at the dock, get your gear, your refill and your outing conditions ready before heading into the water.

For your well-prepared dives

1 L

Tank worn on the back

Harness

Working under a boat requires specific skills and precautions. Plan it with a professional and never dive alone.

Your tank on your back, your regulator within reach: enjoy that freedom with equipment you know. Getting familiar with the OX1000 includes the harness, connections, and monitoring your air supply.

From the workshop to the water, explore the checks presented by OXSEA, refill and maintenance tips, and answers to your safety questions.

OXSEA tanks are designed to be accessible to everyone, with no training required. Your model’s user manual, caring for your gear and diving with a buddy remain essential.

The mini compressor refills OX500 and OX1000 tanks on AC power with a compatible power supply, or a 12 V battery with its alligator clips. Its advantage: getting ready for your outing even away from an outlet. US AC input voltage, frequency and plug are awaiting confirmation. The OX2000 requires the Power.

About 12 minutes for a 0.5-liter tank and about 20 minutes for a 1-liter tank: a handy benchmark for planning your refills. Its compact size and handle make it easy to move between where you store it and where you set it up.

Approx. for 0.5 L

12 min

Approx. for 1 L

20 min

OX500 and OX1000

2 models

Estimated times; they vary with conditions. Follow the user manual and monitor the refill.

On board or on the go, the alligator clips connect the mini compressor to a 12 V battery. Ashore, use a compatible AC power supply. US AC input voltage, frequency and plug are awaiting confirmation. Check the connections and required equipment in the user manual for your version.

The power cable, high-pressure hose, alligator clips and filter pack are included. Breathing-air filtration and its maintenance remain essential every time you use it.

Battery power

12 V

Mains, with the appropriate power supply

US power supply to be confirmed

Stated power

300 W

1. Set up

   Prepare a dry area and a power supply that matches the user manual for your version.

2. Check

   Check the hose, connections and filtration before refilling.

3. Maintain

   Replace the filters and carry out the checks at the scheduled intervals.

For use on AC power, check which power supply is required and whether it comes with your product.

The OXAIR combines the field of view of a full-face mask with hybrid use. At the surface, you breathe through the snorkel; underwater, the right setup lets you use the air from your OXSEA tank.

OX500, OX1000 or OX2000: the connection depends on the model and its equipment. Get to know this setup before use so you can plan an outing that suits the way you dive.

Breathing through the snorkel

At the surface

Air from the connected tank

Underwater

The mask does not add any extra air supply. Air time depends on the tank, your breathing and conditions of use.

A wide visor to take it all in, a soft skirt against your face and adjustable straps for a secure fit. Take the time to check the fit and seal before your outing.

After use, rinse the mask with fresh water and let it dry in the shade. These simple steps, along with the checks in the user manual, help you get ready for your next discovery.

For observing

Wide visor

Securing straps

Adjustable

1. Adjust

   Check the fit and seal on your face.

2. Connect

   Follow the user manual and the tutorial for your tank.

3. Rinse

   Rinse with fresh water, then let it dry in the shade.

The demonstration above is for the OX1000. Follow the instructions for your own model.