Starter Pack: OX500 + Manual Pump + OXAIR

Light dancing on the sand. A school of fish drifting by. That detail you wish you could have watched a little longer. With the OX500, your short dives take on a whole new dimension.

Compact and light, this 0.5-liter tank combines the regulator and pressure gauge in a single unit, held directly in the mouth. Little to carry, and up to 8 minutes of stated air time to enjoy the world below the surface.

Up to, per tank

8 min

Compact format

0.5 L

Regulator and pressure gauge

Built-in

Stated air time; it varies with breathing, depth and exertion. The pressure gauge remains your reference during a well-prepared dive.

The OX500 combines a compressed-air supply, a regulator with a mouthpiece and a built-in pressure gauge. The regulator lets you breathe the air in the tank; the gauge shows the remaining pressure.

The tank can be refilled with the compatible manual pump, mini compressor or Power. The mini accepts AC or 12 V battery power; the more powerful Power refills faster and runs on AC only. US AC input voltage, frequency and plug are awaiting confirmation. After refilling, follow the checks in the user manual.

Held directly

In the mouth

Stated working pressure

200 bar

1. Prepare

   Learn the assembly and checks with the model’s user manual and tutorial.

2. Refill

   Use a compatible refill option and the system designed for breathing air.

3. Observe

   Dive with a buddy while monitoring the pressure.

A weekend on the coast, a few days on board, a new cove to explore: the OX500’s small format easily fits in with your things. Its storage bag makes it easy to carry and protects the gear between outings.

Choose your refill option before you leave and get your gear ready at your destination. Your next discovery starts well before your head goes underwater.

Easy to take along

0.5 L

For storage

Bag included

Air travel takes some gear planning too: check with your airline about its conditions for carrying and preparing the tank before you leave.

Compact size. Essential preparation. With its integrated regulator and pressure gauge, your OX500 deserves a careful introduction before your first dive.

From the workshop to the water, explore the checks presented by OXSEA, refill and maintenance tips, and answers to your safety questions.

OXSEA tanks are designed to be accessible to everyone, with no training required. Your model’s user manual, caring for your gear and diving with a buddy remain essential.

At the dock, ashore or far from any power source, the manual pump lets you refill your OX500. It works by hand, with no battery or wall outlet.

Allow about 20 minutes for a 0.5-liter tank. This freedom takes physical effort: plan for the time needed and the breaks shown in the user manual, and get ready at your own pace.

Manual refilling

No outlet

Approx. for 0.5 L

20 min

Compatible models

OX500

Estimated time; depends on your pace and conditions. Pump not compatible with the OX1000 or OX2000.

The high-pressure hose and filter pack come with the pump. Assembly, connection, pressure monitoring: the demonstrations help you get to know each part before you start.

Filtration and maintenance matter as much as the refill itself. Follow the checks and filter replacements set out in the user manual, and only use a setup suited to breathing air.

High-pressure hose

Included

Filter pack

Included

1. Assemble

   Watch the assembly demonstration in Oxsea School.

2. Check

   Check the connections, hose and filtration system according to the user manual.

3. Maintain

   Follow the filter replacement tutorial and the maintenance schedule.

The OXAIR combines the field of view of a full-face mask with hybrid use. At the surface, you breathe through the snorkel; underwater, the right setup lets you use the air from your OXSEA tank.

OX500, OX1000 or OX2000: the connection depends on the model and its equipment. Get to know this setup before use so you can plan an outing that suits the way you dive.

Breathing through the snorkel

At the surface

Air from the connected tank

Underwater

The mask does not add any extra air supply. Air time depends on the tank, your breathing and conditions of use.

A wide visor to take it all in, a soft skirt against your face and adjustable straps for a secure fit. Take the time to check the fit and seal before your outing.

After use, rinse the mask with fresh water and let it dry in the shade. These simple steps, along with the checks in the user manual, help you get ready for your next discovery.

For observing

Wide visor

Securing straps

Adjustable

1. Adjust

   Check the fit and seal on your face.

2. Connect

   Follow the user manual and the tutorial for your tank.

3. Rinse

   Rinse with fresh water, then let it dry in the shade.